0%

0%

USB REMINDER

Do you suffer from amnesia? The new technology can help you!

Following Follow project

Liked Like project

Become a Hackaday.io member

OR

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

165 views

Description

Some time ago, we used a knotted handkerchief against forgetfulness. Today, hardly anyone wears a handkerchief, but the new technology can help. You can tie a knot on your USB band, and - Voilà! When you see it, you will surely know that there's something that you should remember.
I'm currently working on a special knot for USB 3.0 flashes, which will make you remember even faster.

Discussions

Arya wrote 07/05/2016 at 14:02

Are you planning to make a USB Reminder Reminder as well? Could use a couple of those.

Are you sure? yes | no

Michael Vowles wrote 07/05/2016 at 11:54

Are you doing a kick-starter?

Are you sure? yes | no

Yann Guidon / YGDES wrote 07/04/2016 at 01:12

This begs the inevitable question : How do I remember that I have to look at it ?

Are you sure? yes | no

K.C. Lee wrote 07/04/2016 at 01:24

For a limited time only, you can get one set of these for $19.95...

Are you sure? yes | no

RandyKC wrote 07/03/2016 at 02:06

This is knot what I was expecting.

Are you sure? yes | no

jaromir.sukuba wrote 07/02/2016 at 14:16

Is this knotted USB disk Mac compatible?

Are you sure? yes | no

Voja Antonic wrote 07/02/2016 at 23:38

Not by default, but you can buy the Upgrade Kit with Mac Knottable Ribbon for only $19.99

Are you sure? yes | no

Similar Projects

USB Type-C/PD Analyzer is an Open Source Hardware/Software tool that helps you test, debug and explore USB Type-C/PD Devices.

USB Type-C/USB PD Analyzer

Gotta have more USB ports

4 port USB hub in a square inch

mitchelldokken mitchell.dokken

An open solution enabling everone to build and maintain a IoT enabled sensor network. BeeStalker is the reference for you project!

CM3 Board + Backend-Library + Bee Hive Monitor

When i was working on my pc my all usb port is full so i decided to make a usb hub for myself

Make usb hub for pc with jlcpcb