USE_3D_Printer_RGB_MAX31855.ino

USE_3D_Printer_RGB_MAX31855.ino

This is for the MAX31855, a better chip, using Arduino Nano

ino - 7.08 kB - 08/26/2016 at 08:55

Download

USE_3D_Printer_Heatbed_RGB.ino

// RGB LED Colours
// Blue indicates an error with the Thermocouple Temperature Measuring Probe Sensor
// Less than or equal to 35°C Green. Cool safe
// More than 35°C Less than or equal to 45°C Yellow. Medium Heat. This is red + some green, not total green
// More than 45°C Less than or equal to 50°C Red. Solid. Hot Danger do not touch
// More than 50°C Less than or equal to 170°C Red. Flashing. Very Hot Danger do not touch
// More than 170°C White Quick Flashing Red + Green + Blue LED : TOO HOT!!!! OVER Temperature ERROR!!!

ino - 7.50 kB - 08/12/2016 at 17:52

Download