Gear_M1,5_Z16.stl

This gear is pressed on the axle of the potentiometer. Optionally the 16 teeth gear cut from POM can be glued on top to provide extra strong teeth.

sla - 537.96 kB - 09/12/2016 at 13:19

Download

gears.dxf

All the gears for the 10/25 transmission.

AutoCAD DXF - 219.19 kB - 09/12/2016 at 13:17

Download

Gear_M1,5_Z10.stl

This gear is placed on top of the last gear inside the gearbox of the linear actuator. The little tabs fit inside (may need some filing) the slots of the metal gear. (Gear module = 1.5mm, 10 Teeth)

sla - 491.01 kB - 09/12/2016 at 13:17

Download

Encoder_Base.stl

This part connects to the gearbox of the linear actuator and holds the big gear.

sla - 588.03 kB - 09/12/2016 at 13:14

Download

Encoder_Middle.stl

This part holds potentiometer.

sla - 658.99 kB - 09/12/2016 at 13:14

Download

Encoder_Cap.stl

Cap for the potentiometer with a hole for the cable.

sla - 376.92 kB - 09/12/2016 at 13:14

Download