Robin Fröjd-
Body almost done
08/07/2018 at 05:48 • 0 commentsThe body for the Ardumower is almost done. Fully 3D-printable in a 20x20x20 printer. Designed in Fusion360. The body was sliced in 17 parts. Next up is a finishing and painting. Total print time around 200h with 0.6mm nozzle and 0.28 layers. Here is a snapshot from behind
![]()
-
More 3D-printing
08/04/2018 at 07:02 • 0 commentsFront nose 1/2 just finished! Right side is almost completed.
Body assembly![]()
Body on chassis
![]()
charging pin
![]()
-
More 3D-printing
08/03/2018 at 19:14 • 0 commentsAnother part just finished!
next part is already printing and will be finished tomorrow.![]()
![]()
-
More 3D-printing
08/02/2018 at 22:47 • 0 commentsAnother part just finished!
next part is already printing and will be finished tomorrow.![]()
![]()
![]()
-
3D Printing wheel arches
08/02/2018 at 10:08 • 0 commentsSmall update:
wheel arches fresh from the printer! All parts is completely untouched and no after finishing.
Starting to look good!![]()
![]()
![]()
![]()
