Phoebe Spine.stl

STL for Phoebe's main backbone structure. Will need to be printed with support.

Standard Tesselated Geometry - 1.57 MB - 10/16/2018 at 18:58

Download

Phoebe 1.0.step

STEP file exported from Onshape CAD. (See links section.)

step - 2.43 MB - 10/16/2018 at 18:58

Download

Phoebe Electronics Tray.stl

STL for Phoebe's tray for Raspberry Pi 3, Roboclaw motor controller, 5.0V and 3.0V voltage regulators. Can be printed with sloped bottom side facing print bed.

Standard Tesselated Geometry - 817.37 kB - 10/16/2018 at 18:58

Download

Phoebe LIDAR Front Support.stl

STL for a bracket that clips on to the backbone structure and supports front of Neato LIDAR unit. Designed to be printed upside down without supports.

Standard Tesselated Geometry - 122.84 kB - 10/16/2018 at 18:58

Download