Quantity   Component name
1 × Custom LoRa RF shield
1 × STM32 NUCLEO-144 board
1 × Antenna SMA-male antenna for the right frequency (433MHz, 915MHz, etc.)
1 × USB power supply Need to supply at least 1A
1 × Amateur radio license Technician or higher in the United States to use this semi-custom, experimental RF hardware setup.
1 × USB mini-B cable Used to supply power to the custom RF LoRa shield
1 × USB micro-B cable. Used to connect to the ST-Link that's built into the NUCLEO-144 board.