Files | T962A Controller with 5"/7" Touch TFT (*STM32*)

version 3.5 schematic (jpg format)
*** Added NOTES for proper backlight setup for 5.0" & 7.0" LCDs ***

JPEG Image - 4.64 MB - 10/05/2019 at 21:58

Current user guide (not yet complete), keeping it up here as well on github, so anyone wanting a quick glance can open this up for reference...

Adobe Portable Document Format - 5.74 MB - 09/08/2019 at 13:05

Photo of assembled board, top... showing finished board
(note: a few capacitors were left off when photo was taken)

JPEG Image - 1.42 MB - 08/08/2019 at 23:03

Photo of assembled board, bottom... showing installed 'esp32' wifi module..

JPEG Image - 1.17 MB - 08/08/2019 at 23:02

2nd Pic of PCB installed in oven

JPEG Image - 3.20 MB - 05/28/2019 at 11:29

Pic of PCB installed in oven

JPEG Image - 2.84 MB - 05/28/2019 at 11:29

T962A_Controller_V3.5_Schematic.jpg version 3.5 schematic (jpg format) * Added NOTES for proper backlight setup for 5.0" & 7.0" LCDs * JPEG Image - 4.64 MB - 10/05/2019 at 21:58		Preview

T962A_TFT_User_Guide.pdf Current user guide (not yet complete), keeping it up here as well on github, so anyone wanting a quick glance can open this up for reference... Adobe Portable Document Format - 5.74 MB - 09/08/2019 at 13:05		Preview

top_1.jpg Photo of assembled board, top... showing finished board (note: a few capacitors were left off when photo was taken) JPEG Image - 1.42 MB - 08/08/2019 at 23:03		Preview

bottom_1.jpg Photo of assembled board, bottom... showing installed 'esp32' wifi module.. JPEG Image - 1.17 MB - 08/08/2019 at 23:02		Preview

BOARD_PIC2.jpg 2nd Pic of PCB installed in oven JPEG Image - 3.20 MB - 05/28/2019 at 11:29		Preview

BOARD_PIC1.jpg Pic of PCB installed in oven JPEG Image - 2.84 MB - 05/28/2019 at 11:29		Preview