Quantity   Component name
1 × CEI OX/70-G4 X-Ray tube
1 × Piernas's Fast ZVS https://hackaday.io/project/162935-piernass-fast-zvs-mazzilli-driver
1 × Lots of M3 screws
1 × Fused IEC320 C14 type mains plug
1 × MeanWell EPP-300-48 Main 48V PSU to power the ZVS
1 × 1mm self adhesive lead
1 × Liquid Paraffin Used as dielectric inside the Fibox box
1 × Epoxy resin
1 × XL4015 Step-Down module Feeded with 12V, used to power the tube's filament at 2.75V.
1 × B66397G0000X187 Ungapped ETD59 ferrite core
1 × B66397G1500X187 1.5mm Gapped ETD59 ferrite core
1 × B66398W1024T001 EMI-RFI Suppression and Shielding / Other EMI-RFI Suppressors
1 × 12V Fan
2 × B66398A2000X000 Yokes
1 × Arduino UNO board
1 × Dual 12V Optoisolated Relay Module One relay to control tube's filament, the other to activate the ZVS' Mosfet driver
1 × 12V 36W PSU For the Arduino, ZVS' driver, step-down converter and fan
1 × 5V active buzzer
2 × Line Laser
1 × Block 0.15mm enameled wire For the secondary winding
1 × Fibox PC 125/60 HT Waterproof box for the tube and voltage multiplier
12 × 1nF 20kV ceramic capacitor For the voltage multiplier
12 × 2CL2FM diodes For the voltage multiplier