Low Cost Atmel AVR DIY Programmer
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
List Of All Parts We Need
1.) Atmega 8 ( 1 PCS )
2.)USB Type B Female ( 1PCS)
3.) 3v6 Zener ( 2PCS )
4.) 68 Ohm Resistor ( 2 PCS)
5.) 2.2K Ohm Resistor (1PCS )
6.) 10K Ohm Resistor ( 1 PCS )
7.) 1K Ohm Resistor ( 2Pcs)
8.) 22Pf Ceramic capacitor (2 PCS)
9.) 12Mhz Crystal (1 PCS)
10.) 104-100Nf Ceramic capacitor (1PCS)
11.7Uf 16V capacitor ( 1PCS)
12.) 3mm LED (2 PCS)
13.) Header Pin Male ( 6Pin/PCS)
14.) 28 Pin IC Socket ( 1PCS)
15.) 3P Switch ( optional )
By bringing the USBasp Loader underneath the USBasp firmware you can update your USBasp dongle with USBasp.
Have a look at this: https://hackaday.io/pages/173240
I just added the hex file:
https://gist.github.com/TG9541/80bf2572c4ebdbf4a4336958a75a5853
and sources:
https://github.com/TG9541/stm8ef/files/2751947/USBaspUSBaspLoader.zip
You're welcome :-)
There is also a binary in the archive that contains the USBaspLoader and the USBasp firmware.
Happy coding!
MANORANJAN DAS
DIY GUY Chris
Jithin Sanal
Many Thanks