Close
0%
0%

Nano to Standard SIM card adapter

Ridiculously short project, that works.

daren-schwenkeDaren Schwenke
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
311 views
4 comments
2 followers
View Gallery
I needed to put a nano SIM card into a standard slot, with no Internet access.
OpenSCAD, a micrometer, and 10 minutes later I had this.

Nano SIM looked to be 0.7mm thick.  Standard SIM is 0.8mm thick.

Slice this with 0.1mm layer height, and then the first layer will raise the card to be at the right height.

Nano_to_Standard_SIM.stl

sla - 8.38 kB - 02/27/2019 at 07:02

Download

Nano_to_Standard_SIM.scad

x-openscad - 649.00 bytes - 02/27/2019 at 07:02

Download

  • 1
    Print it.

    Slice with 0.1mm first layer height, and 0.1mm layer height.  3D print it.

View all instructions

Enjoy this project?

Share

Discussions

Lutetium wrote 02/27/2019 at 18:03 • point

The filament color makes it look like balsa wood. That made me laugh for some reason.

Nice quick fix!

  Are you sure? yes | no

Daren Schwenke wrote 02/27/2019 at 19:44 • point

Thanks.  Yeah, I had inadvertently left the slicer at 1 perimeter from printing out *these* when my standard SIM died, so they looked a lot like wood.  The first one I printed had concentric infill too.  :)  

https://hackaday.io/project/163866/gallery#6f11a1b03acfed42d9703d0e0e3fd860

And later:

https://youtu.be/kjhdUWLc4w4

  Are you sure? yes | no

Ken Yap wrote 02/27/2019 at 07:06 • point

Don't you have lots of leftover punch outs from tri-fit SIM packs?

  Are you sure? yes | no

Daren Schwenke wrote 02/27/2019 at 07:26 • point

I had *one*, somewhere...

At about 10 minutes to design and 3 minutes to print, building this was probably faster than trying to find it.

  Are you sure? yes | no

Similar Projects

Business Card
Project Owner Contributor

Card001

shahriar-alamShahriar Alam

this business card project it is not only business card size but also act like a business card.
Project Owner Contributor

business card size project act as business card

zameelzameel

The Hackaday card game.
Project Owner Contributor

Not A Hack

richard-hogbenRichard Hogben

A card reader that uses black and white squares to identify a card.
Project Owner Contributor

Barcode Binary Card Reader

pete-prodoehlPete Prodoehl

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Nano to Standard SIM card adapter", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.