Arduino Reyax RYLR896 LoRa Module Project

An intermediate project involving long range, low power communication between two Arduino boards with the help of the Reyax RYLR896 module.

Electorials

Quantity		Component name
2	×	Reyax RYLR896 LoRa Transceiver Modules
2	×	breadboards
2	×	Arduino Unos You could use any other Arduino boards as well. The Maker Uno and the Seeeduino v4.2 is used in this example.
2	×	USB Data Cable Depends on the Arduinos.
9	×	Jumper Wires 9 Male to Male Jumper Wires.
2	×	LEDs 2 LEDs of any colour.
1	×	4.7K resistor
3	×	10K resistors