8-Bit Hex Decoder

Description

Unlike standard "BCD to 7-Seg" chips like the SN74LS247N which only display 0 to 9, and only decode, this board is designed decode full 8-bit hex to dual 7-segment displays. This means that in addition to 0 to 9, A to F both 4-bit nibbles are also displayed. The GAL16V8 comes preflashed with the required code with source code available. The kit is packaged in a reusable plastic case as a through hole kit with all parts necessary for assembly.

Files

gal-2x7seg.pdf PDF Schematic For GAL16V8 8-Bit Hex Decoder - This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License. CC-BY-NC 4.0, Copyright (C) 2018, David Anders. All Rights Reserved. Adobe Portable Document Format - 16.23 kB - 03/24/2019 at 20:42		Preview

Discussions

hynek wrote 03/26/2019 at 11:17

Seems strange to connect NE555's output signal DIS directly to Vcc...

I'd suggest adding small resistor between R9 - DIS junction and Vcc...

Are you sure? yes | no

Dave's Dev Lab wrote 03/26/2019 at 12:53

yea, this was a quick-n-dirty first draft of the design. the 555 was suppose to be configured for 50% duty cycle. i've already corrected this... thanks for the feedback!

Are you sure? yes | no

8-Bit Hex Decoder

Become a Hackaday.io member

Just one more thing

Description

Files

gal-2x7seg.pdf

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member