GRBL to Parallel Port

Control CNC via parallel port with GRBL

Johnny

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Similar projects worth following

View Gallery

Description

Control your 3020/3040/6040 or similar with GRBL, without modifying your control box. This version works with JP-382A stepper driver board commonly found in these CNC machines.

Details

DB25 Pinout:

Files

GRBL_to_JP-382A.pdf Schematic Adobe Portable Document Format - 76.26 kB - 07/22/2019 at 08:25		Preview

GRBL_to_JP-382A.zip Gerber Files x-zip-compressed - 75.19 kB - 07/22/2019 at 08:25		Download

Components

1 × MH CONNECTORS MHCCOV-25SN-LG The Shell
1 × MENTOR 1282.2000 Light Pipe

Discussions

lIAlexIl wrote 08/19/2022 at 16:23

question, where can I get the firmware for atmega?

Are you sure? yes | no

Addio wrote 04/27/2022 at 03:55

Does this even work? Your schematic doesn't have a crystal for the CH340G, and datasheet says its required. And I'm guessing you just use GRBL firmware?

Are you sure? yes | no

Johnny wrote 08/13/2022 at 04:11

Yes, it works. CH340C doesn't need an external crystal. Yes, it uses GRBL, it's in the name "GRBL to Parallel Port".

Are you sure? yes | no

Addison wrote 11/16/2020 at 08:37

No firmware? Or is it standard grbl?

Are you sure? yes | no

DSam wrote 07/28/2020 at 21:20

Hi there, is this on www.openhardware.io or EasyEDA ? Thanks

Are you sure? yes | no

Johnny wrote 07/28/2020 at 23:41

Hey, just on hackaday.io. Gerber files are on here to download though.

Are you sure? yes | no

Similar Projects

Control de iluminación robótica por pulsaciones dmx

GRBL to Parallel Port

Become a Hackaday.io member

Just one more thing

Description

Details

Files

GRBL_to_JP-382A.pdf

GRBL_to_JP-382A.zip

Components

Enjoy this project?

Discussions

Become a Hackaday.io Member

Similar Projects

Controlador DMX

Power Distribution Box

Universal CNC Control Center

inverted pendulum

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member