Quantity   Component name
1 × Arduino Uno
1 × LCD screen
1 × piece of 8½ inch x 4in x ⅛ in wood for lid of the box
2 × pieces of 4 in x 4 in x ¼ in wood For short sides of the box
2 × pieces of 8 in x 4 in x ¼ in wood For long sides of the box
1 × Box Cutter (or other way to cut wood)
1 × Wood glue/gorilla glue
1 × Tape or clamps For holding box together while gluing
1 × Breadboard(s)
1 × 10k ohm Potentiometer
2 × 220 ohm Resistor Only one needed for arcade push button
1 × Push button 2-pin arcade push button or 4-pin button
2 × Alligator clips (if using an arcade push button)
32 × Jumper wires
1 × battery/power source for Arduino
1 × piece of 8½ inch x 4in x ¼ in wood for base of the box