ST7789 and ST7735 Breakout Board
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
0.96" ST7735 80x160 8Pin  |   |  |
0.96" ST7735 80x160 13Pin |   |  |
1.14" ST7789V 135x240 13Pin  |   |  |
1.3" ST7789 240x240 12Pin  |   |  |
1.3" ST7789 240x240 24Pin  |   |  |
1.54" ST7789 240x240 12Pin  |   |  |
1.54" ST7789 240x240 22Pin |   |  |
2.0" ST7789 240x320 12Pin |  |  |
2.0" ST7789 240x320 22Pin |  |  |
2.4" ST7789 240x320 24Pin |  |  |
LCD IPS - Breakot Board - Rev1.zipGerber files - OshparkZip Archive - 112.79 kB - 11/11/2019 at 18:28 |
|
I agree, That is the one I tested in the video and it works. The schematic model is what I got from the Aliexpress Supplier which is probably not correct. The symbol may not be correct but the schematic works. I used the schematic from Adafruit to verify the pinout
John Loeffler
Craig Hissett
Bharbour
Shreyas shah
mcu_nerd
Interesting project and timely for me doing something similar. In my case I'm trying to hedge my bets (and avoid researching the multitude of displays available). Seeing what you have come up with has been helpful so thank you for sharing. When I'm confident with the pin outs I get to I'll share those as well.
One observation for display 3, and this may or may not be an issue but having seen it I'd be rude not saying something: the DC pin and signal don't match up and the CLK is on the DC pin. This is probably perfectly correct and just an artifact of the mux'ing on the pins but I mention it just in case.
Thanks again.