Orange Pi Zero based instant photo maker
Already have an account? Log in.
To make the experience fit your profile, pick a username and tell us what interests you.
The project was inspired by Mitxela's https://hackaday.com/2018/04/16/polaroid-gets-thermal-printer-and-raspberry-pi/
Extended details and steps can be found on my GitHub page: https://github.com/kami4ka/Poor-Man-s-Polaroid
Link to 3D model: https://a360.co/2s8DhJL
main.pyPython scriptx-python-script - 1.49 kB - 11/24/2019 at 11:37 |
|
https://www.armbian.com/ for my case
- Install fswebcam (sudo apt-get install fswebcam) and connect your webcam
- Connect and configure your printer (very useful link https://learn.adafruit.com/networked-thermal-printer-using-cups-and-raspberry-pi/connect-and-configure-printer)
- Connect button (for my case PA.10 pin is used as input and connected to one button's pin and another pin is connected to 3.3V pin)
- (optional) Connect button's LED or separate LED (for my case PA.14 pin is connected to LED's + terminal and GND pin to LED's - terminal)
Thanks. The original idea was to make it looking like an eye. Also I've added few magnets to back plate, so it can be easily mounted to fridge, for example.
Oleg Kulyk
gucifer@2.5
having11
Enrique
Asim Rasheed
I wasn't sure about the spherical form factor at first, but I think I like it. Reminds me of an old webcam that I had once - spherical, much smaller, and it sat in a little cradle so it could be easily positioned.