• Testing Results 20200116

    Ian Shannon Weber • 01/17/2020 at 01:08 • 0 comments

    I am running into issues and running out of time. I am running into a problem with the LPC804 and the deadline for getting boards manufactured is approaching. The processor at the heart of this version of the project will be my familiar PIC18F45K20.

    I am unable to interface with my LPC804 with my J-link-2 debugger. The problem also occurs on my dev board which means that I did something to either the programmer or my workspace, and I am having issues narrowing it down any further. Moral of the story is do not try and develop on an 8 year old laptop that is held together with stickers and duct tape.

  • PCBWay Boards Arrived and Undergoing Test

    Ian Shannon Weber • 01/12/2020 at 04:10 • 0 comments

    I received the board on Thursday night and proceed to do some basic testing. I ran into problems with some part sizing on the 10 pin header of the cap touch board. Next on the to-do list is to take the demo code from NXP and correct the pins in hardware. Fingers-crossed that I got the cap touch design correct.

  • PCBWay Boards

    Ian Shannon Weber • 01/09/2020 at 02:07 • 0 comments

    The boards have shipped from PCBway through DHL. They should be arriving in the morning, where they will be assembled and tested. Expect an update log by Saturday 01/11/2020.

  • Test Boards are Sent Out

    Ian Shannon Weber • 01/04/2020 at 01:31 • 0 comments

    These boards are to test my designs for the capacitive touch and the flush mounted LEDs