Quantity   Component name
1 × SCART-HDMI Scaler Converter This allows you to use a HDMI display as a monitor
1 × 6 Pin Din male plug To connect the 6128 to the HDMI converter
1 × HDMI cable
1 × Scart connector To connect the 6128 to the HDMI converter
1 × 5 volt 2 amp adaptor To power the 6128
1 × 5 pin Din male plug For the cassette connection
2 × 1/8" mono male audio plug For the cassette connection
1 × 40 pin edge connector To connect the IO card
1 × Gotek USB floppy drive
1 × Arduino Nano Can be any Arduino which has 9 tri state io pins and 4 input pins
1 × PCD + Components NPN transistor, 10K resistor, 10uf capacitor, ic sockets, 4002 ic, connectors