K-9 Rocket Thrust Vector Control Gimbal

Open Source tested and Proven Model Rocket TVC Gimbal

Canine Defense Technologi

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Public Chat

Similar projects worth following

View Gallery

Public Chat

Description

This is a 3D Printable, Fully Open Source, Fully tested TVC gimbal system to control the vector of low to mid powered model rocket motors. Thanks to the entire community who took part in getting this system to it's current reliability! Full report below and files linked below

Details

Files

K-9 TVC V7 R1 .step Full CAD file! step - 879.28 kB - 10/08/2021 at 17:29		Download
Motor Tube V8.3mf 3mf - 203.30 kB - 10/08/2021 at 17:29		Download
Inner Gimbal V8.3mf 3mf - 51.23 kB - 10/08/2021 at 17:29		Download
Outer Gimbal V8.3mf 3mf - 66.38 kB - 10/08/2021 at 17:29		Download
TVC Files.zip Older Version if your interested x-zip-compressed - 2.74 MB - 01/27/2020 at 16:44		Download

Components

2 × 9 Gram Micro Servo Make sure servos have sufficient response time
10 × M3.5 MM screws
3 × M 2.5 MM Screws
2 × Servo Rods
3 × 3D Printed parts

Project Logs

Collapse

Public Domain, V8, and CAD FILES YAY!
Canine Defense Technologi • 10/08/2021 at 20:57 • 0 comments

It now officially belongs to you, we made the bold step to release the STEP , made the files go under the public domain, and made V8. Thank you to all the users who provided feedback or gave us a smile sharing your progress with our open-sourced hardware!

View project log

Discussions

ZachG27 wrote 05/02/2023 at 18:25

What is the outer diameter?

Are you sure? yes | no

Dan Maloney wrote 01/27/2020 at 17:35

Love the deluge system on the test stand!

Are you sure? yes | no

Canine Defense Technologi wrote 01/27/2020 at 20:44

Thank you very much sir! It proved pretty effective, though posed a few issues, so I am currently working on a new water deluge system.

Are you sure? yes | no

Tom Nardi wrote 02/04/2020 at 07:21

Right? That and the stovepipe "flame trench" really make for an awesome small scale test stand.

Are you sure? yes | no

Canine Defense Technologi wrote 02/09/2020 at 18:17

Thank you so much! I think I might post the test stand onto here too!

Are you sure? yes | no

K-9 Rocket Thrust Vector Control Gimbal

Become a Hackaday.io member

Just one more thing

Description

Details

Files

K-9 TVC V7 R1 .step

Motor Tube V8.3mf

Inner Gimbal V8.3mf

Outer Gimbal V8.3mf

TVC Files.zip

Components

Project Logs Collapse

Public Domain, V8, and CAD FILES YAY!

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member

Project Logs

Collapse