Front.jpg

Front view of the display, time is 9:05.

JPEG Image - 2.28 MB - 03/03/2020 at 04:11

Preview

Exploded.jpg

Exploded view showing the two housing pieces and the circuit elements.

JPEG Image - 1.04 MB - 03/03/2020 at 04:30

Preview

Inside.jpg

View of the interior

JPEG Image - 2.03 MB - 03/03/2020 at 04:11

Preview

Main board.jpg

View of the main board and the real-time clock

JPEG Image - 2.43 MB - 03/03/2020 at 04:11

Preview

TFT.jpg

View of TFT, with case open

JPEG Image - 2.08 MB - 03/03/2020 at 04:11

Preview

Front.stl

3D file of the Front of the Housing. I printed with the front of the housing standing upright on the printbed (as it will stand when finished). I used support.

Standard Tesselated Geometry - 171.18 kB - 03/03/2020 at 04:20

Download

Back.stl

3D file of the Back of the housing. I printed with the back face of the back housing lying down on the print bed. I did not use any support.

Standard Tesselated Geometry - 173.52 kB - 03/03/2020 at 04:20

Download

Clock of Love v32.f3z

Fusion 360 file of the front and back housing

f3z - 2.35 MB - 03/03/2020 at 04:00

Download

Mom_TFT_clock06.ino

Arduino project, also include images.h into your project. Updated 3/4/2020 to include options for daylight savings time. Spring forward or Fall back!

ino - 18.33 kB - 03/04/2020 at 17:19

Download

images.h

Arduino project that includes the hour images. Used with Mom_TFT...

h - 21.33 kB - 03/03/2020 at 03:41

Download

ds3231_setTime.ino

Run this file first to set the real-time clock. This program has a few variables so you can offset the hour to correct UTC time. Also, you can includes a few seconds adjustment to account for the compiling and uploading time. Load this to set the UTC time, then upload the Mom_TFT final program.

- 2.89 kB - 03/04/2020 at 17:23

Download