Quantity   Component name
8 × 2" x 8" x 10' pressure treated lumber Joists for the wall, kicker board and side supports
4 × 2" x 8" x 8' pressure treated lumber Bottom and top plates for wall and kicker
1 × Holds Set This is somewhat of a personal preference. We went with a 40 piece Metolius Foundation Hold Set.
1 × Paint If you wanna' paint it, you need paint.
3 × 3/4" x 4' x 8' ppressure treated plywood
5 × 4" x 4" Steel Square Door Hinge Between kicker board and wall
8 × Bolts, Washers and Nuts Bolts, washers and nuts hold the main sections together. Our build used BIG ones because the wife was a bit worried.
1 × Box of 2 3/4" screws For wall boards
1 × Box of 3" deck screws For framing
200 × T-Nuts Outdoor-rated T-nuts. You need about 200 to fill the entire board. Best to buy in bulck on Amazon
50 × Climbing Hold Bolts Bolt on holds need bolts. Length depends on the holds you get. They need to match the T-Nuts. You should get outdoor rated stainless.