Fritz.png

This diagram show an Arduino uno. The wiring and sketch should work for either. Feel free to mix it up :)

Portable Network Graphics (PNG) - 334.00 kB - 04/10/2020 at 07:39

Preview

RoadMap.png

Basic manual of operation. This could be greatly improved.

Portable Network Graphics (PNG) - 176.11 kB - 04/10/2020 at 05:47

Preview

200404Nano_firmware.ino

The Arduino sketch. I had to use the old boot loader to upload this to the Nano. It should also work on most Arduino boards.

x-arduino - 3.22 kB - 04/10/2020 at 05:07

Download

light holder.scad

The openSCAD file for all the light holder components. May not be reader friendly, however added here so that others may modify the components for their own use.
The base design for the hotshoe came from Raster (Hot Shoe Mount by raster 06NOV2012. From Thingiverse).

scad - 4.03 kB - 04/10/2020 at 04:58

Download

box.scad

The openSCAD file for all the light holder components. May not be reader friendly, however added here so that others may modify the components for their own use.

scad - 5.26 kB - 04/10/2020 at 04:58

Download

boxHolder.scad

The openSCAD file for all the light holder components. May not be reader friendly, however added here so that others may modify the components for their own use.

scad - 488.00 bytes - 04/10/2020 at 04:58

Download

light holder_armLong.stl

sla - 813.15 kB - 04/10/2020 at 04:58

Download

light holder_knuckle.stl

sla - 514.76 kB - 04/10/2020 at 04:58

Download

light holder_ring.stl

sla - 596.23 kB - 04/10/2020 at 04:58

Download

light holder_hotshoe.stl

sla - 418.96 kB - 04/10/2020 at 04:58

Download

box_top.stl

sla - 130.83 kB - 04/10/2020 at 04:58

Download

box_bottom.stl

sla - 369.91 kB - 04/10/2020 at 04:57

Download

boxHolder.stl

sla - 69.51 kB - 04/10/2020 at 04:57

Download