Close
0%
0%

MadEyes

Camera Server with supporting 5 POE cameras, USB storage, internal power supplies and light indication of motion detection.

blacklyquidblacklyquid
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Public Chat
Similar projects worth following
317 views
2 comments
257 followers
View Gallery
Public Chat
In the process of building an IP Camera server. The build so far contains a clear plexiglass housing, an ATX power supply, an 8 port switch, 1 5T USB drive with room for a second, an odroid with motionEye, a raspberry pi with raspbian and node red, an 8x8 RGB Square and cable management.

The short video shows the system in response to motion detection.

RJ45 KEYSTONE PLATE POE.stl

Standard Tesselated Geometry - 262.97 kB - 05/03/2020 at 22:31

Download

ATX PSU BACK PLATE.stl

Standard Tesselated Geometry - 113.56 kB - 05/03/2020 at 22:23

Download

  • 1 × Odroid XU4
  • 1 × Raspberry PI
  • 1 × 5T USB Drive
  • 1 × ATX Power Supply
  • 1 × 8 Port Switch

View all 9 components

  • Front Panel

    blacklyquid • 05/06/2020 at 19:11 • 0 comments

    Working on finishing up some of the front panel details.  Attached 8x8 RGB panel, connected the switch and a little bead board so the front panel can easily be removed by unplugging cables.

    There is a DS18B20 sensor that is not currently working with node-red, will be shortly.

View project log

Enjoy this project?

Share

Discussions

Robin wrote 05/02/2020 at 15:26 • point

What are the lead screws doing?

  Are you sure? yes | no

blacklyquid wrote 05/03/2020 at 17:27 • point

The lead screws pull and push holders for the usb hard drives, supports 2 but only 1 is currently being used. Using a  screw driver you can push in to disengage the little gears, then turn to clamp the drive into place.

  Are you sure? yes | no

Similar Projects

Shaped like a USB stick, ideal for a Raspberry Pi or Jetson. Connect up to 28 devices to a Pi.
Project Owner Contributor

StickHub - The Space Friendly 7-Port USB 2 Hub

rbtscorbtsco

A night vision camera built with a raspberry pi zero w, night vision camera plus a 3.2" screen
Project Owner Contributor

Night vision camera raspberry pi

facelessloserfacelessloser

Pi5 with 500Gb NVMe drive running Kali Linux. Hosted in a 26 x 12 x 7 cm vintage enclosure
Project Owner Contributor

Mini Pi5 Kali Cyberdeck

hans-jrgen-grimstadHans Jørgen Grimstad

If you can change a light bulb.... You can install this security camera
Project Owner Contributor

Mighty Lighty

kelleykelley

Does this project spark your interest?

Become a member to follow this project and never miss any updates

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "MadEyes", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.