-
Design in production
12/07/2021 at 00:25 • 0 commentsThese are first models I ordered made in China, the clear portion is Polycarbonate and the rest is PETG and Silicon around the edges.
-
Dad sized for a mask
07/25/2020 at 03:03 • 0 comments -
Vacuum Table for UCPLA use
07/19/2020 at 22:48 • 0 commentsAs anyone knows who is keeping up with the project, the goal here is to get UCPLA resources to make as many of these masks as they need, not just a method of how to do it. Here is their vacuum table to use in their shop.
-
Clear Cover Vacuum Bucks
07/18/2020 at 20:30 • 0 commentsOkay I sized all the clear cover part bucks to match the sizing frames. Here are the first three bucks of 14. All three will be finished tomorrow and I will get the next three printing. I am considering leveling some of the new printers and start them up for once. I only have so much time and setting up printers can take a lot of time to dial in especially when there are several printers your working with. In the picture we have 97 percent , 94 percent and 91 percent sizes.
-
My fiancé fitting a mask
07/18/2020 at 02:18 • 0 commentsShe has an abnormally small and short nose, so the padding in the nose has to be a thicker to fill for gap OR I can 3D print a space that glues in. Honestly I like the spacer add in better because this is meant to be a premium fitment solution.
I plan to take a photo of every person I size for a participation record as well as further improvement to sizing design. -
My step kid 14 years old sizing a mask
07/18/2020 at 02:14 • 0 commentsThe masks usually fit well enough that they will hang on the face without much effort, but of course they will need straps
-
My Mom tries on a mask
07/18/2020 at 01:52 • 0 commentsthis is the shot where she is telling me not to take a picture because she doesn’t have her makeup on.. lol
-
Sizers done, 1-14
07/18/2020 at 01:48 • 0 comments -
Fitting a mask for my 6 yr old
07/18/2020 at 01:36 • 0 commentsit actually fits well enough he can hang it on his face like hanging a spoon or n your nose! Lol well anyways his size is 10 from the top, he cannot wait to have his own now.
I just printed three more mask sizers for a total of 14 right now. Originally I planned to go down to 20 sizes but I may stop at 17. The mask frames only take a few hours to print when they are a smaller size.