|
track 4.jpg
one long track, now to make another one.
JPEG Image -
4.04 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
voltage controllers.jpg
voltage regulators for rc controller and servos for gun
JPEG Image -
2.95 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
whole hull.jpg
the hull is coming together nicely
JPEG Image -
3.08 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
Track side.jpg
a lot of droop on that track without the road wheels and tension
JPEG Image -
2.95 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
upper hull side view.jpg
upper hull from the side
JPEG Image -
2.29 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
track adjuster.jpg
eye bolt used to adjust tension on the tracks
JPEG Image -
2.45 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
motor controller and voltage regulators.jpg
motor controller and voltage regulators
JPEG Image -
2.76 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
track 2.jpg
tons of bolts and hinges
JPEG Image -
2.39 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
track 1.jpg
start of track assembly. 2 inch hinges bolted together with stainless steel bolts. the bolts serve as guides to help keep the tracks on the drive and road wheels.
JPEG Image -
2.26 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
side tracks 2.jpg
track in place looking like a tank
JPEG Image -
3.12 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
side tracks.jpg
track in place looking like a tank
JPEG Image -
3.15 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
side drive.jpg
drive sprocket, idler wheel, and track carrier wheel
JPEG Image -
3.09 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
motor contoller mount.jpg
Motor controller mount
JPEG Image -
3.38 MB -
06/19/2020 at 06:05
|
|
Preview
|
|
|
side drive track 2.jpg
tracks around drive sprocket
JPEG Image -
2.97 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
side drive tracks.jpg
Tracks around drive sprocket
JPEG Image -
3.16 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
road wheels.jpg
Road wheels
JPEG Image -
2.80 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
rear track close up.jpg
close up of the track on the rear idler wheels
JPEG Image -
2.80 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
road wheels and tracks.jpg
road wheels with the tracks in place
JPEG Image -
2.68 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
on all fours.jpg
finally setting on the tracks and ready to roll
JPEG Image -
3.22 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
rear motor vent.jpg
motor vent on rear of the tank
JPEG Image -
2.14 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
motor layout.jpg
Motor layout
JPEG Image -
3.57 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
motor controller compartment.jpg
Compartment for the motor controller. It has springs that attach to the controller for shock absorption
JPEG Image -
3.09 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
rear motor vent 1.jpg
Rear vent for motor (on real tank) used to circulate air on my motors with a computer fan.
JPEG Image -
2.22 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
rear hull.jpg
Rear hull coming together
JPEG Image -
2.97 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
front half of upper hull.jpg
beginning the upper hull - lots of tough angles here. Glad I'm working in wood.
JPEG Image -
3.42 MB -
06/19/2020 at 06:04
|
|
Preview
|
|
|
hull cutouts.jpg
cutouts in hull
JPEG Image -
2.64 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
hull details.jpg
hull details
JPEG Image -
2.24 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
drive sprocket 1.jpg
drive sprocket close up
JPEG Image -
3.15 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
fenders 1.jpg
fenders
JPEG Image -
2.14 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
fender rear.jpg
rear fender detail
JPEG Image -
2.44 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
front hull.jpg
front hull
JPEG Image -
2.10 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
fenders 2.jpg
fenders
JPEG Image -
2.13 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
bushings.jpg
bushings and bearings for drive axles and bogies
JPEG Image -
2.26 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
bogies.jpg
road wheel bogies
JPEG Image -
2.46 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
base2.jpg
lower hull
JPEG Image -
2.97 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
battery compartment.jpg
battery compartment with charging port and RC controller power switch
JPEG Image -
2.98 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
p2.jpg
Detailed Drawings
JPEG Image -
51.45 kB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
bogie axles.jpg
road wheel bogies with axles
JPEG Image -
2.63 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
basic upper hull.jpg
upper hull beginning to take shape
JPEG Image -
2.88 MB -
06/19/2020 at 06:03
|
|
Preview
|
|
|
Base1.jpg
lower hull beginning to take shape
JPEG Image -
2.71 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base sides.jpg
lower hull sides
JPEG Image -
2.77 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base painted.jpg
lower hull painted
JPEG Image -
2.89 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base rear.jpg
lower hull rear
JPEG Image -
2.52 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base front.jpg
Lower hull front
JPEG Image -
2.43 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
access door open.jpg
Access door to RC power and charging port held closed with magnets
JPEG Image -
2.83 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base and motors.jpg
Lower hull and motors
JPEG Image -
2.55 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
video tracks working.mp4
Rolling tracks to adjust tension
MPEG-4 Video -
6.27 MB -
06/19/2020 at 06:02
|
|
Download
|
|
access door closed.jpg
Access door to RC power and charging port.
JPEG Image -
2.95 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
is-2-armour-1.png
Detailed Drawings
Portable Network Graphics (PNG) -
329.70 kB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
p3 (1).jpg
Detailed Drawings
JPEG Image -
49.46 kB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
fenders 3.jpg
Fenders
JPEG Image -
1.90 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
base and axle.jpg
Axle fit into bearings.
JPEG Image -
2.65 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
axle close up.jpg
5/8" drive axle
JPEG Image -
2.44 MB -
06/19/2020 at 06:02
|
|
Preview
|
|
|
front fender.jpg
Front fender detail and headlight
JPEG Image -
1.78 MB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
zVwJG5V.jpg
Detailed Drawings
JPEG Image -
116.86 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
sd_kfz_138_2_jagdpanzer_38_t_hetzer-72386.jpg
Detailed Drawings
JPEG Image -
80.56 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
panzerjager_g13_hetzer-75300.jpg
Detailed Drawings
JPEG Image -
123.24 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
panzer2.gif
Detailed Drawings
Graphics Interchange Format -
139.14 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
p3.jpg
Detailed Drawings
JPEG Image -
49.46 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
hetzer_16.jpg
Detailed Drawings
JPEG Image -
260.46 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
p1.jpg
Detailed Drawings
JPEG Image -
64.77 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
hetzer.jpg
Detailed Drawings
JPEG Image -
21.30 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
|
78319_10151102112707467_2068635587_o.jpg
Detailed Drawings
JPEG Image -
63.78 kB -
06/19/2020 at 06:01
|
|
Preview
|
|
Bret Tallent