Quantity   Component name
4 × Stepper Motors Nema 17 Stepper Motor 42BYGH 1.8 Degree 38MM 1.5A 42 Motor (17HS4401S) 42N.cm (60oz.in) 4-Lead
4 × Stepper Motor Drivers DRV8825 Stepper Motor Driver Module with Heat Sink for 3D Printer Rrerap Ramps 1.4 A4988
1 × Red/Black Multi-Core Cable For some internal wiring between switches, etc.
4 × Female Spade Crimps 6.3mm For connecting to the switch.
1 × Electrical Tape RED For sorting out the cabling nightmare.
4 × Stepper Cables Should come with the stepper... Please don't get long ones! They're a nightmare to fit in the box!
1 × USB B Type Cable Or whatever you need to plug the Arduino module in to your PC.
24 × 3M Recessed Head 10mm Screws
1 × IEC Power Cable Whatever you need for your power supply.
1 × Arduino Uno Must be Uno pin compatible (3.3V or 5V). Longer boards will not physically fit!
1 × CNC V3.0 Shield IndustrialMaker V3.0 Engraver 3D Printer CNC Shield Expansion Board A4988 Driver for Arduino
1 × DP(ST/DT) Power Switch Needed the crimps bent to fit though... Vertical spacing issue! Digikey PN: 486-1440-ND
1 × High Voltage Range LED Module Runs off of a huge voltage range! Digikey PN: PML50RGFVW-ND
1 × 18V-35V Power Supply 40W+ Needs to physically fit, but the hole cutout will need to be modified to suit your choice. A higher voltage is better (faster steppers).
22 × Enclosure Parts Uploaded in files. Includes enclosure lid/base, 4x stepper arms & 16x recessed screw adapters.
1 × Thick Double-Sided Tape Holds done the power supply/uno. I used digikey part number: 3M159716-ND
4 × Rubber Feet For the base of the enclosure. This will effect the sound of the unit depending on your table surface.