bean_hopper.scad

This is the single-dosing bean hopper and indexing ring, scaled appropriately to fit the Rocky. Units in millimeters.

x-openscad - 3.31 kB - 07/16/2020 at 21:24

Download

grounds_plate.scad

These are the grounds sweepers for the bottom burr assembly. They are slightly too big, and the corners need to be cut off (picture in build log)

x-openscad - 895.00 bytes - 07/16/2020 at 21:24

Download

popcorn_screen.scad

This is the anti-popcorning screen that was an abysmal failure. It's a tight fit.

x-openscad - 574.00 bytes - 07/16/2020 at 21:24

Download