Quantity   Component name
1 × Arduino Nano V3
1 × MMA_7455 Acceleratormeter
1 × RTC 1307
1 × IRL540N Discrete Semiconductors / Power Transistors and MOSFETs
1 × DCDC Converter - 5V to 170V
1 × 74141 - Binary to Decimal Converter w. common kathode driver
1 × 7805 Regulator Microprocessors, Microcontrollers, DSPs / Display, Graphics Microcontrollers
1 × 230 uF Cap (min. 12V)
2 × 2,8k Ohms Resistor
1 × 2k Ohms Resistor
1 × 100 Ohms Resistor
1 × Current limiting Resistor for Nixietube - 1k
1 × Flex cable w. 3 lines
1 × 90° Degree aluminium angle - holds the flex-cable and the ballbearing on the inner side
1 × ball bearing + screws (M1)
1 × Wood arm (Pendulum) - 22 x 3 x 1 cm
1 × Wood stand - 22 x 6 x 1 cm
1 × Wood standof - 5 x 3 x 1 cm
1 × Wood foot- 18 x 6 x 1 cm
1 × a few cables
1 × Plasic stadof to adjust the height of the air coil + screw
1 × wood screws to keep it all in place
1 × Neodyne magnet (cubic 1x1x1 cm)