Quantity   Component name
1 × Stack-chan PCB board You can use the gerber files for ordering PCB: https://github.com/meganetaaan/stack-chan/tree/main/schematics/m5-pantilt/gerber
1 × 10V/100uF capacitor
1 × 2x15 2.54mm pin header (smd) https://shop.m5stack.com/products/2x15-pin-headers-socket
2 × 2x2 2.54mm pin header (through hole)
1 × 400mAh LiPo battery with JST PH 2-pin connector
2 × 1x4 2.00mm pin header
1 × 1kohm 1608metric resistor (smd)
1 × 100ohm 1608metric resistor (smd)
1 × (Optional) JST PH 4-pin Connector
1 × (Optional) Power switch EG1224 https://www.digikey.com/en/products/detail/e-switch/EG1224/502052
1 × 3-State Buffer IC NL27WZ125 https://www.digikey.jp/number/ja/on-semiconductor/488/NL27WZ125/291486
1 × JST PH 2-pin Connector
1 × A set of 3D-printed case components "Shell", "bracket" and "feet". You can download from "files" section.
1 × Two servo motors The example on this page uses Futaba RS304MD: http://futaba.co.jp/robot/command_type_servos/rs304md
1 × M5Stack Core One of Basic/Gray/Go/Fire: https://shop.m5stack.com/collections/stack-series
2 × M2 4mm screw
2 × M2 8mm screw
2 × M3 14mm screw