Quantity   Component name
1 × 28-29 gauge magnet copper wire 100 turns on each the transmitter and receiver coil
1 × IRFP 460 n-Channel Mosfet
1 × 470 uf radial electrolytic capaciter 16 volts
4 × Polypropylene box capacitor 100V Can add up to three capacitors for each transmitter and receiver coil.
1 × 100 ohm register
2 × induction toroidal choke
1 × Variable DC power source or 9-volt battery with potentiometer.
1 × LED
12 × Breadboard jumper wires (will need about 10-12)
2 × Breadboards (or soldering copper prototype printed circuit boards)
2 × Wooden plaque boards (optional)