Close
0%
0%

Pump House Monitor

Monitoring the outdoor pump house that pulls water from a well to supply the house with water.

kody-alan-rogersKody Alan Rogers
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
65 views
1 comments
0 followers
This project is going to start as only temperature monitoring combined with an alert to give a warning if the pump house is getting close to freezing. Eventually, I want to add a pressure sensor as well to alert if the pump is not working correctly.

  • First Edition

    Kody Alan Rogers • 09/25/2021 at 16:27 • 0 comments

    I just set up a basic temperature monitor in the pump house using the MKR WiFi. The code currently has no alert system enabled, but that is next on the list.

    Also, I know the instructions are not very good and hopefully, they will be improved at a later date.

View project log

  • 1
    Wire the board

    Place the AM2302 sensor on the board along with the MKR 1010 and wire them together following this great article on Adafruit: https://learn.adafruit.com/dht/connecting-to-a-dhtxx-sensor.

  • 2
    Set up a 'Thing' on the Arduino IoT cloud

    I configured the 'Thing' with one variable (a float) to hold the temperature and I called it inner_temperature. If you have not configured an IoT cloud 'Thing' before I would check out this great tutorial: https://docs.arduino.cc/cloud/iot-cloud/tutorials/iot-cloud-getting-started.

  • 3
    Upload the Code

    If you upload it from the Arduino IDE ensure the 'Thing ID' is correct since your 'Thing ID' will be different from mine.

    If you upload it from the browser editor then you should be able to just copy and past the .ino code from the Github and hopefully, it will work.

View all 3 instructions

Enjoy this project?

Share

Discussions

ten93881 wrote 07/22/2023 at 08:12 • point

The Pump House Monitor from nitenitestore. is a game-changer! It offers real-time monitoring and control of my pump system, ensuring I never have to worry about water levels or malfunctions. As a homeowner, this device brings immense peace of mind, and I highly recommend it to anyone looking for efficient pump management.

  Are you sure? yes | no

Similar Projects

Development of an intelligent rainwater collection and irrigation system.
Project Owner Contributor

Automated Irrigation System

kyle-gabrielKyle Gabriel

A smart automated balcony plants watering system
Project Owner Contributor

Project Demetra

fabioFabio

monitor you water levels in your tank and control 4 irragation zones while monitoring the soil moisture for them
Project Owner Contributor

rain water irragation controler

robRob

Poolheater for a small swimmingpool for use in the Norwegian summer.
Project Owner Contributor

1kW Poolheater

non-iceNon-ICE

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Pump House Monitor", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.