3D Printed GT2 Profile TPU Belt with PLA Sprockets

Description

Timing belts and sprockets are important components of 3D printers. I've long considered using 3D printed timing belt and sprockets in some of my 3D printed models but had never fully studied their design and did not know whether or not I could design and 3D print them. This model is my first GT2 profile belt and sprocket design. The belt was 3D printed in Ultimaker TPU filament, and the sprockets and base were 3D printed in Ultimaker PLA filament.

The belt consists of 60 teeth and is 6mm wide. The sprockets consist of 20 teeth. The sprocket to sprocket spacing is 40mm.

The model requires a N20 6VDC 60RPM gear motor and a 6VDC power supply. The included video illustrates the assembly process.

I was actually quite surprised that it worked and will be incorporating 3D printed TPU belts and 3D printed PLA sprockets in some of my upcoming models!

Video of the model in action is here: https://youtu.be/9bsGlOF47Gs

I've included the STL files for the model, and the video shows how to assemble it. The model requires an N20 6VDC 60RPM gear motor and a 4VDC power supply.

Files

Belt (For 3D Printing).stl

Standard Tesselated Geometry - 1.67 MB - 12/02/2021 at 01:26

Download

Sprocket, Idle.stl

Standard Tesselated Geometry - 727.04 kB - 12/02/2021 at 01:26

Download

Sprocket, Motor.stl

Standard Tesselated Geometry - 739.05 kB - 12/02/2021 at 01:26

Download

Sprocket, Idle, Axle.stl

Standard Tesselated Geometry - 334.36 kB - 12/02/2021 at 01:26

Download

Base.stl

Standard Tesselated Geometry - 281.43 kB - 12/02/2021 at 01:26

Download

Discussions

3D Printed GT2 Profile TPU Belt with PLA Sprockets

Become a Hackaday.io member

Just one more thing

Description

Details

Files

Belt (For 3D Printing).stl

Sprocket, Idle.stl

Sprocket, Motor.stl

Sprocket, Idle, Axle.stl

Base.stl

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member