Detect PM2.5 Concentration in the air

PMS3003 or PMS5003 is a sensor of air quality, it can detect the concentration of those 0.3 to 10 micrometer particulate matters in the air.

Daphne

Following Follow project

Liked Like project

Become a Hackaday.io member

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

OK, I'm done! Skip

Public Chat

Similar projects worth following

64 views

0 comments

0 followers

2 likes

View Gallery

Public Chat

Description

The PMS3003 or PMS5003 sensor detects the concentration value of PM 1.0, PM 2.5, PM 10. Take PM 2.5 for example, it stands for the fine particles with a diameter of 2.5 micrometers or less.

Details

Ameba RTL8722DM is a low-power dual-band WLAN and Bluetooth Low Energy SoC by Realtek. The RTL8722DM also include memory for Wi-Fi protocol functions and application making it simple for anyone to develop various kind of IoT applications. At the same time it has a wide range of peripheral interfaces. With all these interfaces, it can connect to most of the electronics components like LEDs, temperature and humidity sensors, and so on.

More Resources:

If you need additional technical documents or the source code for this project. Please visit the official websites and join the Facebook group and forum.

Ameba Official Website: https://www.amebaiot.com/en/
Ameba Facebook Group: https://www.facebook.com/groups/amebaioten
Ameba Forum: https://forum.amebaiot.com/

Components

1 × RTL8722DM_MINI
1 × PMS3003/PMS5003

Build Instructions

Collapse

1

Setup

Open the example in “File” -> “Examples” -> “AmebaSoftwareSerial” -> “PMS3003_AirQuality”
Connect up the air sensor to RTL8722DM_MINI:
2

Final Result

Compile the code and upload it to Ameba. After pressing the Reset button, Ameba starts to output the PM 2.5 data to serial monitor.