#Zepir CYBERDECK - Raspberry Pi Zero mini computer

Description

Same as original #Zepir but optimized for DIY assembly
- TH components, but there is only buttons :D
- Display on module via cable ideal for notebook style
- integrated simple MOSFET speaker amplifier
- USB type C for power
- Power switch
- RPI zero
- Onboard USB A for easy USB connection to ZERO but you need connect D+,D- to board test points
- Optional RFM95 Lora module, but never tested and never connected, use same SPI gpio as Display, you can not use together, after LoRa connection you need use HDMI

More details about display and keyboard configuration:

https://hackaday.io/project/176706-zepir-raspberry-pi-zero-mini-computer

Discussions

teraz wrote 03/06/2022 at 14:32

will you be done in time for World War III?

Are you sure? yes | no

teraz wrote 01/02/2022 at 22:51

please add AltGr https://en.wikipedia.org/wiki/AltGr_key many languages. If it is not trouble add knob for volume, control and pgup down etc.

is possible puting biger screen but not color? for power eficient

Are you sure? yes | no

bobricius wrote 01/02/2022 at 22:57

You can connect any screen if you configure driver, In next release I can add +6 buttons

Are you sure? yes | no

teraz wrote 01/04/2022 at 11:54

In my opinion when we use software that has already been in use for years, then unfortunately the keyboard is very important. Keyboard shortcuts are often permanently fixed and cannot be changed.

Therfore if this is linux not You own system the keyboard is important. Not everyone is going to use mouse on this hardware.

As for the screen, some keys (e.g. F1 ) can be moved near to the screen (on cover).

What do you think about the fact that the mounting holes should not only use raspberry pi zero but also orange crab and any feather layout? Orange crab have lipo power connector too.

Are you sure? yes | no

bobricius wrote 01/04/2022 at 12:29

I am limited with GPIO count, I found one more extra GPIO when I not use RESET line on display. I can not use any chip so it is limited, I understand you

Are you sure? yes | no

teraz wrote 01/05/2022 at 23:45

meybe change a linux keyboard driver? this is probably only text file ....

Are you sure? yes | no

bobricius wrote 01/05/2022 at 23:46

Code is on github, feel free to modify

Are you sure? yes | no

teraz wrote 01/06/2022 at 16:08

i wrote about increase keys and not using more GPIO

Are you sure? yes | no

#Zepir CYBERDECK - Raspberry Pi Zero mini computer

Become a Hackaday.io member

Just one more thing

Description

Details

Enjoy this project?

Discussions

Become a Hackaday.io Member

Does this project spark your interest?

Report project as inappropriate

Send message

Remove Member