Due to a small flaw in the previous design, the LCD could not be soldered directly on the back of the BW16-Stamp, which was disappointing, this has taught me the important lesson once again -- don't take others' work as granted and perfect, always check and be careful, so that everybody's contribution to the open-source community won't go to waste.

Anyway, this time around, I have re-design the board with correct footprint and symbol, measured all dimensions and angles to ensure it is correct this time. 

Schematic will be made public and available for download once I have received the PCB and confirm it is indeed working, but for now, we can have some previews,

---

So stay tuned and wait for my good news!