kelvinAThis is a place to put any discoveries I find, if anyone was looking at this project for inspiration.
[T] Idle thoughts
A project log for SecSavr Sublime [gd0036]
An FDM 3D printer that I described as "The FULL Coverage, Extended X, Pro Max, Ultramatrix Solution".
Discussions
Become a Hackaday.io Member
Create an account to leave a comment. Already have an account? Log In.
I've found a better 330fps camera option: https://www.aliexpress.com/item/1005005102333833.html
This camera has a smaller PCB, the actual sensor is on a ribbon cable (thus even easier to mount in a printhead) and can do 1080p 120FPS allegedly, unlike 60FPS for the 38x38mm board I found.
Are you sure? yes | no
Just discovered this article whilst scanning through the site's assortment of articles:
https://3dprintingindustry.com/news/q5d-raises-2-5m-towards-rd-of-robotic-5-axis-wiring-and-electronics-3d-printing-technology-203587
Video: https://youtu.be/VvqJHBRyTKs
Seems like some companies in 2019 had the same basic idea I had in this project (5 axis, toolchanging, copper wire placing) and got together to collaborate on developing a solution.
Are you sure? yes | no
Induction heating instead of the volcano block would've been a really nice feature to have for a toolchanger:
https://www.fabbaloo.com/news/no-cooling-fan-plasmics-revolutionary-induction-heated-hot-end
Are you sure? yes | no