Files | BM-SYS | Hackaday.io

Outer Shell of the battery.

Standard Tesselated Geometry - 2.13 MB - 04/20/2022 at 12:19

Main connection part for both the PD module and the BMS

Standard Tesselated Geometry - 1.35 MB - 04/20/2022 at 12:19

Cell Holders, 4 to print in total

Standard Tesselated Geometry - 510.63 kB - 04/20/2022 at 12:18

Holder for XT30 connector

Standard Tesselated Geometry - 194.22 kB - 04/20/2022 at 12:18

Pin locking the XT connector to the brain unit. 2 to print in total

Standard Tesselated Geometry - 18.83 kB - 04/20/2022 at 12:18

Central Stud connecting all the cell holders together to ensure a good rigidity

Standard Tesselated Geometry - 9.85 kB - 04/20/2022 at 12:18

Shell.stl Outer Shell of the battery. Standard Tesselated Geometry - 2.13 MB - 04/20/2022 at 12:19		Download
Brain.stl Main connection part for both the PD module and the BMS Standard Tesselated Geometry - 1.35 MB - 04/20/2022 at 12:19		Download
Full_Cell_Holder_evenbettertolerance.stl Cell Holders, 4 to print in total Standard Tesselated Geometry - 510.63 kB - 04/20/2022 at 12:18		Download
XT.stl Holder for XT30 connector Standard Tesselated Geometry - 194.22 kB - 04/20/2022 at 12:18		Download
Pin.stl Pin locking the XT connector to the brain unit. 2 to print in total Standard Tesselated Geometry - 18.83 kB - 04/20/2022 at 12:18		Download
Central_Stud.stl Central Stud connecting all the cell holders together to ensure a good rigidity Standard Tesselated Geometry - 9.85 kB - 04/20/2022 at 12:18		Download