To late for me?

Hmm... I have no clue why this code

https://gist.github.com/Stefan-Xp/e0cd595200d31ee6518c

doesn't work :-(

If i assign a fixed mode, every mode works ...

Perhapps I have to sleep over it.

Discussions

davedarko wrote 10/01/2014 at 22:53

Easy ;) had the same last week with my gameboy printer. Well I'm guessing that with 33×3×9 bytes from your arrays you are dangerously close to the 1kb sram of your atmega16. Try storing the arrays in program memory. Seach for progmem. I hope that fixes it and i haven't jinxed it with saying "easy".

Are you sure? yes | no

davedarko wrote 10/02/2014 at 08:17

Reply to the reply for the attention.

Are you sure? yes | no

Stefan-Xp wrote 10/05/2014 at 15:29

Thank you. This step seems rather difficult, i have to check this out when i have some time left.

Are you sure? yes | no

davedarko wrote 10/05/2014 at 17:31

cool cool, good luck!

Are you sure? yes | no

Example Project 5 - 3x3x3 LED cube - SW Expansion

Example Project 5 - 3x3x3 LED cube - New Thoughts

Discussions

Become a Hackaday.io Member