Quantity   Component name
20 × Self tapping countersunk wood screws 13x3 General assembly
10 × Self tapping countersunk wood screws 25x3 Or the thickness of your wood + 4 or 5 mm
2 × M4 x 10 screws with wingnuts For guiderails
1 × M4 x 15 with wingnut For bow
1 × M6 x 40 bolt and wing nut
1 × M4 x 100 + 3 nuts and washers Wire tension at the bottom
2 × Wood or acrylic 200x300 For the top and bottom
1 × Motor controller 12V https://jasonwinfield.nz/product/motor-speed-controller-for-hotwire-cutter/
1 × Red and black hookup wire approx 1 meter of each
1 × Wood framing. I used 18x40mm wood but you could use anything around this size.
1 × 3D printed parts, check files.
1 × Nichrome wire approx 300mm
1 × Banana terminals 1 black, 1 red
1 × Computer or laptop power supply
1 × 10mm washer