Project Logs

Collapse

• New protections for coreXY sliding parts and motors

  Tanguy • 04/07/2023 at 11:07 • 0 comments

  New protections for coreXY sliding parts and motors.
  It's mainly for avoiding dirt and hurting the belt.
  
  

• Old android tablet with Klipper screen !

  Tanguy • 01/30/2023 at 21:43 • 0 comments

  Added an old Adroid tablet with Klipper screen, and it look so cool !
  Fixed it with a 3d printed mount.
  
  

• New hot end and dirty direct drive

  Tanguy • 01/30/2023 at 21:37 • 0 comments

  I have add a new hot end and modify the head to make it a direct drive. it's dirty for the moment but this improve drastically the prints quality
  New hot end : https://fr.aliexpress.com/item/1005004356062840.html?spm=a2g0o.order_list.order_list_main.136.868a5e5bEGcrf3&gatewayAdapt=glo2fra
  

  
   

• Add protections on the top left and right pulley

  Tanguy • 10/05/2022 at 20:44 • 0 comments

  
  

• Cables management

  Tanguy • 10/03/2022 at 09:06 • 0 comments

• Time to remplace the mainboard by an skr and rewire everything

  Tanguy • 10/03/2022 at 09:04 • 0 comments

• Replace X/Y motors by bigger one

  Tanguy • 10/02/2022 at 10:34 • 0 comments

  
  

• Corner braces and 3d printed angles everywhere

  Tanguy • 10/01/2022 at 12:12 • 0 comments

• Plug a raspberry pi with octoprint for remote control

  Tanguy • 09/24/2022 at 17:42 • 0 comments

  
  (I will migrate to Klipper later, when replacing the stock motherboard to a skr board)

• Remplace buildtak by 500x500 glass bed

  Tanguy • 09/24/2022 at 17:32 • 0 comments

  
  

View all 14 project logs