Tanguy-
New protections for coreXY sliding parts and motors
04/07/2023 at 11:07 • 0 commentsNew protections for coreXY sliding parts and motors.
It's mainly for avoiding dirt and hurting the belt.![]()
-
Old android tablet with Klipper screen !
01/30/2023 at 21:43 • 0 commentsAdded an old Adroid tablet with Klipper screen, and it look so cool !
Fixed it with a 3d printed mount.![]()
-
New hot end and dirty direct drive
01/30/2023 at 21:37 • 0 commentsI have add a new hot end and modify the head to make it a direct drive. it's dirty for the moment but this improve drastically the prints quality ![]()
New hot end : https://fr.aliexpress.com/item/1005004356062840.html?spm=a2g0o.order_list.order_list_main.136.868a5e5bEGcrf3&gatewayAdapt=glo2fra![]()
-
Add protections on the top left and right pulley
10/05/2022 at 20:44 • 0 comments![]()
-
Cables management
10/03/2022 at 09:06 • 0 comments![]()
-
Time to remplace the mainboard by an skr and rewire everything
10/03/2022 at 09:04 • 0 comments![]()
-
Replace X/Y motors by bigger one
10/02/2022 at 10:34 • 0 comments![]()
-
Corner braces and 3d printed angles everywhere
10/01/2022 at 12:12 • 0 comments![]()
![]()
-
Plug a raspberry pi with octoprint for remote control
09/24/2022 at 17:42 • 0 comments![]()
(I will migrate to Klipper later, when replacing the stock motherboard to a skr board) -
Remplace buildtak by 500x500 glass bed
09/24/2022 at 17:32 • 0 comments![]()
New hot end : 
