Close
0%
0%

Flite Test Gremlin FPV Drone

Using an old frame I bought a while back and the newer parts on the Flite Test website to build my very first FPV drone

jibrilJibril
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Public Chat
Similar projects worth following
228 views
0 comments
2 followers
View Gallery
Public Chat
I 3D printed some skids and an FC adapter(Glow in the dark) for this build.

Parts listed below:

FT Gremlin 1104 5400kv Motor
Link: https://store.flitetest.com/ft-gremlin-1104-5400kv-motor/

GHF411 PRO-BMI 40A Toothpick F4 2-6S AIO BRUSHLESS Flight Controller
Link: https://store.flitetest.com/ghf411-pro-bmi-40a-toothpick-f4-2-6s-aio-brushless-flight-controller/

LEMON RX DSMP (DSMX COMPATIBLE) DIVERSITY SATELLITE
Link: https://store.flitetest.com/lemon-rx-dsmp-dsmx-compatible-diversity-satellite/

Caddx Ant AIO FPV Camera
Link: https://store.flitetest.com/caddx-ant-aio-fpv-camera/

     UPDATE

The original AIO to 20x20 design was too large and was the wrong orientation for this build and won't work so I designed one with the correct orientation and small enough to fit the flight controller.

AIO TO 20X20 MASTER1.stl

The AIO adapter used in this build

Standard Tesselated Geometry - 74.98 kB - 01/10/2023 at 14:25

Download

skids_11xx_9mm.stl

Skids I used in this build

Standard Tesselated Geometry - 170.69 kB - 11/14/2022 at 21:50

Download

  • 1 × Caddx Ant AIO FPV Camera FPV Camera
  • 1 × GHF411 PRO-BMI 40A Toothpick F4 2-6S AIO BRUSHLESS Flight Controller Flight Controller
  • 4 × FT Gremlin 1104 5400kv Motor Motors
  • 1 × LEMON RX DSMP (DSMX COMPATIBLE) DIVERSITY SATELLITE Receiver
  • 4 × 2.3 inch BabyHawk Propellers Propellers

  • Upadate on adapter design

    Jibril • 01/10/2023 at 15:03 • 0 comments

        UPDATE

    The original AIO to 20x20 design was too large and was the wrong orientation for this build and won't work so I designed one with the correct orientation and small enough to fit the flight controller.

View project log

Enjoy this project?

Share

Discussions

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2025 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "Flite Test Gremlin FPV Drone", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.