Close
0%
0%

ken.do

I design 3D, print 3D, fly 3D... is there a pattern here? I do custom work 2

British Columbia, Canada
Following
Send a private message
Similar accounts worth following
48 Followers
34 Following
30 Projects
418 Likes
kendo
Send a private message

This user joined on 12/29/2015.

4k
49
3
41
Flight time and versatility will be vastly extended using a combination of multirotor, blended wing, and hydrogen fuel cell technologies.
Project Owner Contributor

'Bird of Prey II' Super Long Range VTOL UAV

kendoken.do

88
2
1
1
Generating electricity using the force of wind on an airfoil to create perpendicular motion that pushes a magnet through a coil
Project Owner Contributor

PowerKite: Airfoil-based electricity generator

kendoken.do

91
3
6
5
Split firewood like a pro, even if you are coordinationally challenged!
Project Owner Contributor

Laser-Guided Splitting Maul

kendoken.do

593
13
0
8
Self-balancing robot with deployable arm
Project Owner Contributor

Spherical Robot with Extensible Arm

kendoken.do

369
9
0
6
Static-orientation screen holder with dynamic gyro-based controls for RC vehicles
Project Owner Contributor

FoneTroll II: Gyro-mounted FPV/controller

kendoken.do

114
601
5
47
Original design v-tail quadcopter, all pieces 3D printed. 2213 935kv motors running 10.5 inch props with a 4400mah battery.
Project Owner Contributor

Raptor V-Tail Quadcopter Drone

kendoken.do

View all 30 projects

  • Tindie
7.1k
448
8
259
A place for Tindie sellers and the community to meet and stretch their legs
Project Owner Contributor

Tindie Dog Park

tindieTindie

1.1k
1.2k
2
39
Hackaday has a chat for everything except drones
Project Owner Contributor

Chat for Drones

actualdragonActualDragon

734
687
3
13
MorningStar's Walking, Talking, Flying and Swimming Oracle
Project Owner Contributor

Pandelphi

morningstarMorning.Star

Things I've Built

Illuminated Rubiks Cube Stand

My son got a set of 5 different cubes for Christmas. He did the initial design work on the stand and I (being a little OCD and tech-mad) finished it off and added LED illumination.

V-tail Quadcopter Drone

My first 3D design for 3D printing, this ferocious beast is 525mm motor to motor, weighs just under 1kg, 100% original design, and is scary in the air. I am peddling the frame on <a href="http://Tindie.com"; target="_blank">Tindie.com</a>.

Quick and Dirty Treasure Chest

My daughter wanted a treasure chest for Christmas in the worst way. Mass-produced plastic was not even an option, so I built one with utility-grade cedar cut-offs and a 3D printed latch.

Steampunk Swampboat

A friend asked me to beef up his Mini Alligator Tours swamp boat. After extensive testing of the mod, I decided I needed one too. I reverse engineered the boat in pieces to fit my 6" 3D printer bed and gave it a little steampunk flair.

18.3k
145
24
151
Less than 10$ educational platform with micro magnetic robot (mBot), only 6 GPIO to move in unlimited X/Y 2D space
Project Owner Contributor

2D actuator move micro robot in X/Y 2D space

bobriciusbobricius

13.4k
63
19
79
A byte-wide stripped-down version of the YGREC16 architecture
Project Owner Contributor

YGREC8

yann-guidon-ygdesYann Guidon / YGDES

11.7k
123
7
104
Compact, handheld air guitar with four LiDAR strings and Bluetooth
Project Owner Contributor

Litar: LiDAR Air Guitar

bleckyBlecky

11.6k
79
2
71
An excellent customizable game controller kit for your phone.
Project Owner Contributor

Phonetroller

zakqwyzakqwy

9.4k
54
6
43
A high performance Z-axis that is free of z-wobble and will not drop when power is cut.
Project Owner Contributor

Belt Lifted Z-Axis for a 3D Printer

mark-rehorstMark Rehorst

8.3k
53
4
57
Distilling my experience and wisdom about the architecture, organisation and design choices of my CPUs
Project Owner Contributor

PDP - Processor Design Principles

yann-guidon-ygdesYann Guidon / YGDES

6k
72
8
72
Design and develop a tank with additively manufactured thread and re-using filament spools as wheels
Project Owner Contributor

The Innovation Tank -3D Printed Treads-

yusuke-tanakaYusuke Tanaka

4.8k
59
2
50
Developing a full featured datalogger on the cheap
Project Owner Contributor

MagiLog: Open Automotive Datalogging

nigelNigel

4.3k
44
17
75
Another hexadecimal display, this one is sans transistor for the extra vintage touch, and uses only Soviet-era parts
Project Owner Contributor

Numitron Hexadecimal display module

yann-guidon-ygdesYann Guidon / YGDES

2k
34
4
30
Use a Raspberry Pi and a OLED screen to constantly output BTC/GBP rate
Project Owner Contributor

Bitcoin live stats using Raspberry Pi 3

ash-johnsonAsh Johnson

2k
27
17
29
A group for those who want to build their own bipolar transistors
Project Owner Contributor

Bipolar dudes

yann-guidon-ygdesYann Guidon / YGDES

1.8k
29
10
54
A proof that the PIC10F200 can be useful after all.
Project Owner Contributor

Morse blinking jewelry

yann-guidon-ygdesYann Guidon / YGDES

1.2k
39
1
45
Changed cause of supplies avalible
Project Owner Contributor

Halo Armor

walkerdevWalkerDev

1.2k
18
2
8
A reinterpretation on the CNC system to control a small garden, but using delta mechanics and fishing lines for large areas.
Project Owner Contributor

Delta Farmbot

tanahTanaH

1.1k
11
3
15
The 3d design is adorned with 20 servos, embedded proximity sensors, lighting effects, and breath sensing to allow the design to come alive.
Project Owner Contributor

SpiderDress

maddymaddy

1k
14
7
31
Because I want to create a good-for-all language borrowing qualities from Bash, BASIC, C, Forth and JavaScript
Project Owner Contributor

BCFJ

yann-guidon-ygdesYann Guidon / YGDES

734
687
3
13
MorningStar's Walking, Talking, Flying and Swimming Oracle
Project Owner Contributor

Pandelphi

morningstarMorning.Star

620
19
15
38
I'm using modern tools and methods to implement a very fast FHP3 binary model on your desktop
Project Owner Contributor

2D Flow simulations with Lattice Gas Automata

yann-guidon-ygdesYann Guidon / YGDES

View all

Share this profile

Share

Bits

Yann Guidon / YGDES wrote 04/17/2018 at 23:22 • point

Thanks for the likes ! I hope you have fun reading all the logs :-D

  Are you sure? yes | no

ken.do wrote 04/18/2018 at 14:22 • point

I might be done reading next year...

  Are you sure? yes | no

Wassim wrote 04/23/2017 at 10:43 • point

Thanks from the #Home Smart Mesh project, I'm currently moving its nodes to the STM32 Bluepill, by designing extension boards, any ideas or suggestions for applications with the STM32 bluepill are welcome.

  Are you sure? yes | no

longtolik wrote 04/22/2017 at 19:34 • point

Dear Ken, thanks for liking the pisk!

  Are you sure? yes | no

ken.do wrote 04/22/2017 at 20:04 • point

No problem. It is a good idea. Please look at my projects and give a like!

  Are you sure? yes | no

ken.do wrote 04/22/2017 at 22:08 • point

No problem. Thanks for the likes back! I like the name pisk honker!

  Are you sure? yes | no

David H Haffner Sr wrote 04/22/2017 at 18:35 • point

Thank you so much for the like Ken!!

  Are you sure? yes | no

Eric Hertz wrote 04/11/2017 at 00:38 • point

Howdy Ken, Thanks for the like!

  Are you sure? yes | no

Patrick Van Oosterwijck wrote 04/05/2017 at 03:44 • point

Thank you for liking and following my #LiFePO4wered/Solar1 and #LiFePO4wered/Pi+ projects!

  Are you sure? yes | no

Nolan Moore wrote 06/02/2016 at 18:10 • point

Hi Ken, thanks for the Like on the Power Glove project!

  Are you sure? yes | no

Send a private message to ken.do

Become cool instantly

Create your Hackaday.io profile like ken.do and many others

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More

Report user as inappropriate

You are about to report the user "ken.do", please tell us the reason.