Files | Machinist's Hammer - Lathe Training Project

Counter Sink on top of hammer head for accepting the flat head cap screw.

x-nc - 1.79 kB - 12/20/2016 at 18:47

Handle machining operations

x-nc - 11.83 kB - 12/20/2016 at 18:47

For recreating the hammer faces

x-nc - 7.31 kB - 12/20/2016 at 18:47

Facing operation to receive the hammer faces

x-nc - 7.46 kB - 12/20/2016 at 18:47

Internal taper in the hammer head to receive the handle.

x-nc - 4.70 kB - 12/20/2016 at 18:47

Turning operation to create the point on the centerpunch.

x-nc - 1.45 kB - 12/20/2016 at 18:47

Hammer Face

x-nc - 16.12 kB - 12/20/2016 at 18:47

Turning and tapping the end of the centerpunch.

x-nc - 8.82 kB - 12/20/2016 at 18:47

Knurling detail

JPEG Image - 2.80 MB - 12/09/2016 at 22:41

Head 45,0 Counter Sink.nc Counter Sink on top of hammer head for accepting the flat head cap screw. x-nc - 1.79 kB - 12/20/2016 at 18:47		Download
Op2_Tors_Handle.nc Handle machining operations x-nc - 11.83 kB - 12/20/2016 at 18:47		Download
Replacement Face.nc For recreating the hammer faces x-nc - 7.31 kB - 12/20/2016 at 18:47		Download
Head - Face.nc Facing operation to receive the hammer faces x-nc - 7.46 kB - 12/20/2016 at 18:47		Download
Head 1,5 Taper.nc Internal taper in the hammer head to receive the handle. x-nc - 4.70 kB - 12/20/2016 at 18:47		Download
Punch Point.nc Turning operation to create the point on the centerpunch. x-nc - 1.45 kB - 12/20/2016 at 18:47		Download
Cap - Face.nc Hammer Face x-nc - 16.12 kB - 12/20/2016 at 18:47		Download
Punch - Face.nc Turning and tapping the end of the centerpunch. x-nc - 8.82 kB - 12/20/2016 at 18:47		Download
Tor_Hammer - 7.jpg Knurling detail JPEG Image - 2.80 MB - 12/09/2016 at 22:41		Preview