Batmobile

We are redoing the propellers with a better pitch and larger in order to see if this is going to make our batmobile flies. Then we made all the connection with all the motors and we decided to add led. 

We paint our car in black with two blue lines. I think it's kind of cute, it looks like a mini Mustang car :)

Today we didn't receive the receiver we needed to make our car ride. So we took an arduino card with a remote.

In today's class we are desining all the pieces we need to build our Batmobile and we're using glue to make them all stick together. We also reunite all the componant we need in order to have a preview of what we need to do next session. And we printed the propellers that we designed last week.

Today we realized that we actually were trying to do a helicoptere with wheels. Unfortunatly it was too complicated so we decided to make kind of a hovercraft, still with wheels. In order to do that, we modelised the propellers, we're going to put 2, both under the car, one in the front and the other at in the back. We changed the dimensions of the batmobile to have enought place for the propellers. 

We also have decided to keep the prototype in cardboard and to improve it in order to have a better aspect of our car.

We did a prototype with cardboard. 

We made searches to know how to make the car fly.

We choose the component and we decided to just make the car levitate and not really fly like an helicopter because it was too complicated.