Close
0%
0%

ESPClicker

ESPClicker is a simple project that will allow you to convert various household appliances into IoT

dmDM
Following
Liked Like project

Just one more thing

To make the experience fit your profile, pick a username and tell us what interests you.

Pick an awesome username
hackaday.io/
Your profile's URL: hackaday.io/username. Max 25 alphanumeric characters.
Pick a few interests
Projects that share your interests
People that share your interests

We found and based on your interests.

Choose more interests.

OK, I'm done! Skip
Similar projects worth following
241 views
0 comments
4 followers
View Gallery
Espclicker is a small device that you can use to integrate not IoT devices into your smart home setup, It connects directly to the push buttons of the device, which you want to control, and then simulates pressing them. You can simulate button clicks, hold time, and multiple clicks. Espclicker has three small relays One of which can be configured as normally open or normally closed. also, it has a contactless AC power detector and two “low-side” switches, for connecting additional power relays, so you can connect external relays with different coil ratings, for controlling the big load.

https://youtu.be/Gc4yCd9yvuE

All files are available on GitHub: https://github.com/PricelessToolkit/ESPClicker

Technical Specifications

  • 4 Layer PCB
  • WiFi Module ESP8266 ESP-12F
  • 3x Built-in signal relays ( Control PINS: R1-GPIO4, R2-GPIO5, R3-GPIO12 ) "R1 can be configured as normally open or normally closed" MAX LOAD 500mA 24V
  • 2x Low-Side Switch "ULM2003" ( Control PINS: LS1-GPIO14, LS2-GPIO15 ) MAX LOAD 300mA
  • 1x ADC Pin "1V Max"
  • 1x ACS Pin "AC Power Detector" (Input Pin GPIO13)
  • Requires 5-12V 500mA power supply

  • 3 × CL31A226KAHNNNE 1206 22uF
  • 3 × CC0603KRX7R9BB104 0603 100nf
  • 9 × RC0603JR-0710KL 0603 10K
  • 1 × 1N4148WS SOD-323
  • 1 × TPSPX3819M5-L-3-3

View all 14 components

  • 1
    Step 1

View all instructions

Enjoy this project?

Share

Discussions

Similar Projects

Consumer products merged into a custom display
Project Owner Contributor

Organ-Playing Skeleton

bryanlowderbryan.lowder

An automated bridge crusher that was designed to crush Popsicle stick bridges in a repeatable and consistent manor. Can measure up to 500kg.
Project Owner Contributor

Popsicle stick bridge crusher

joel-newmanJoel Newman

One of my designs needs a soft power button with sense output. I'm posting my design here to be reviewed and improved.
Project Owner Contributor

Soft power button with sense output

christophChristoph

Adding Wi-Fi to an Ikea dishwasher to be able to control it using a home automation system.
Project Owner Contributor

Adding WiFi control to an Ikea dishwasher

nickbNickB

Does this project spark your interest?

Become a member to follow this project and never miss any updates

Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday

Yes, delete it Cancel

Report project as inappropriate

You are about to report the project "ESPClicker", please tell us the reason.

Send message

Your application has been submitted.

Remove Member

Are you sure you want to remove yourself as a member for this project?

Project owner will be notified upon removal.