0%

0%

Joel Newman

EE + EET with a focus on power systems

Victoria BC

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 02/15/2020.

My Projects

An automated bridge crusher that was designed to crush Popsicle stick bridges in a repeatable and consistent manor. Can measure up to 500kg.

Popsicle stick bridge crusher

joel-newman Joel Newman

Projects I Like & Follow

While you could use a WiFi shield, or one of the many, many, ESP8266-equipped 'duinos out there, why not just make your USB cable WIRELESS?

Wireless USB for Instant IoT

thane-hunt Thane Hunt

Hackaday Prize 2019

An Off-the-grid messaging system.

Skrypt

Turn your Raspberry Pi 3 into an Eddystone URL beacon

Raspberry Pi 3 as an Eddystone URL beacon

Yamir Encarnacion

A compact modular design of the strain wave gear for general robotic applications.

Compact Strain Wave Gear Actuator(s)

The goal of this project is to create an Open-Source-Debugger for AVRs via Debug Wire.

DebugWire Debugger

BlackIce is the fusion of FPGA & ARM - a low cost open source hardware FPGA dev board bound together with innovative open source toolchain

BlackIce - Low Cost Open Hardware FPGA Dev Board

The 2018 Hackaday Prize

Robotic platform for water quality sensors inspired by clams.

Open Source Underwater Distributed Sensor Network

michael-barton-sweeney Michael Barton-Sweeney

A computer built around a Atari 2600 (VCS), with a few nifty upgrades, 6502, 64k + 128bytes ram, coprocessor, 77 is getting a rework

Super atari 6502 (A "DIY" 2600 hardware clone...)

The 2016 Hackaday Prize

An open source 3D printable robotic prosthetic leg.

Drakkar - printable robotic prosthetic leg

david-sanchez-falero David Sanchez Falero

The 2017 Hackaday Prize

Fully 3D-printable electric longboard drivetrain with built-in idler system.

3D-Printed Electric Longboard

yowhwui yowhwui

How to make IoT projects with Blynk app and ESP8266 WiFi Arduino compatible module

Arduino ESP8266 Blynk tutorial - IoT project

Measurement of uncomplicated electrical consumption using a powerful Blynk Dashboard

Meter PZEM-004 + ESP8266 & Platform IoT Blynk App

How you can get multi-connect and remote access to USB Dongle

Donglify - Share USB Key Software

The 2018 Hackaday Prize

A wearable PC using a Raspberry Pi and a Vufine as the display.

Raspberry Pi Wearable

The 2017 Hackaday Prize

Simplify the way of documenting projects in software and hardware, based on Raspberry Pi Zero and camera module

FabDoc - Version Control Tool for makers

kevin-cheng Kevin Cheng

A button built using a particle photon with IFTTT to trigger a light to turn off through Smartthings Hub.

IOT Button

justin-cole Justin Cole

Hacking together an Arduino board package for the PADI IoT Stamp/RTL8710AF

PADI IoT Stamp running Arduino

Smart tank robot with facial recognition

WiFi Tank Robot

sinclair-gurny Sinclair Gurny

View all

Bits