Organizing my Wera screwdrivers sets i get to those large one that i either need to keep in the drawer, either to use the original Wera tool holder that is design to be a wall mount, but i didn't have any place to mount it. After some brainstorming i come up with this compact screwdriver that can be bolted on the side of my existing Al frame. It provide easy way and efficient way to store similar sets of 6 screwdrivers. The design is split by two in order to fit my From2 SLA printer. 4 1/8" pins allow for alignment of the two half's. I use a JB Weld epoxy to bond the two parts permanently but this is not required if you have the pins on place and bolt it to something as i did.