0%

0%

wschneider

Maker and Hacker from MA

Waltham, MA

Following Follow me

Send a private message

Similar accounts worth following

Send a private message

GitHub

This user joined on 01/10/2024.

My Projects

A Simple SCARA robot designed around 2020 V-Slot Extrusion

2020 SCARA Concept

Projects I Like & Follow

The 2016 Hackaday Prize

Hobby brushless motors are incredibly cheap and powerful. However we need a way to make robots out of them. ODrive is that way.

ODrive - High performance motor control

oskar-weigl Oskar Weigl

An interface breakout board for Raspberry Pi Compute Module 4, permanently attached to a 7" IPS touchscreen display

Raspberry Pi CM4 Сarrier with Hi-Res MIPI Display

sasha-shturma Sasha Shturma

The 2017 Hackaday Prize

Creating a four legged robot with a running bound gait.

Mr. Runner

alex-martin Alex Martin

Released in late 2007 NAND Flash capacity was still very limited (4GB and 8GB MLC). But is it possible to replace the aging NAND Flash?

iPod Nano 3rd Gen MLC NAND Upgrade & Software Hack

hugo-melder Hugo Melder

Run Stremio on Raspberry Pi with a kiosk look

Install Stremio on Raspberry Pi

Get high-resolution 3D printing by building your own.

Laser SLA 3D printer with galvo

mark-peng Mark Peng

A low cost bed upgrade that adds a second slave heater to allow the bed to reach 110C and also makes the bed flatter and more rigid.

Monoprice Mini 3D Printer Bed Upgrade

The 2017 Hackaday Prize

Open-Source, easy to build IOT Dosimeter with sensors and Internet connectivity to centralise data.

Open Source IOT Platform

radu-motisan Radu Motisan

Small UPS with fix 3V3/1A output and adjustable 1.3 to 12V output, Li-Ion charger and protection

IoT UPS

christoph-tack Christoph Tack

The 2016 Hackaday Prize

Eliminate belts, pulleys, leadscrews.

linear stepper motor 3d printer

The 2017 Hackaday Prize

a professional RS422 / RS485 shield with many options

RS485 / RS422 shield for Raspberry Pi

Hackaday Prize 2019

The Arduino Nano Quick Project. Develop Everywhere.

Arduino Nano QP

alain-mauer Alain Mauer

Building a set of controllers for Kerbal Space Program including attitude, translation, throttle and hotkey inputs

KSP Controller Hardware

Converting a Palm Pilot Portable Keyboard into a Bluetooth keyboard using a TinyPICO ESP32

Palm Pilot Keyboard Bluetooth Conversion

Use Raspberry-Pi DPI hardware to drive four chains of RGB LED panels.

Improved Raspberry-Pi RGB Matrix Driver

Robert Rouquette

Battery is dead so the bench supply jumps in

Bench Supply Bluetooth Speaker

mike-szczys Mike Szczys

My adventures into hacking a bluetooth / wifi connected trail cam.

Hacking a Bluetooth / Wifi enabled Trailcam

chris-jones Chris Jones

Big clock from the 90's overhauled to obey an ESP32 instead of its old motherboard. Lots of possibilities for display. Very clicky.

IOT Mechanical Clock with Bluetooth App

keenan-rebera Keenan Rebera

View all

Bits