Quantity   Component name
1 × Arduino Mega Sensor measurements, connected to the Rasp-Pi
1 × Raspberry Pi WiFi connected, online data logging, pictures
1 × Raspberry Pi NoIr camera There is no InfraRed filter mounted on the camera lens, which is useful for near-infrared analysis.
2 × Low-power FM stereo radio module TEA5767 Philips Programmable Low-power FM Stereo Radio. Used to test music effect on plants
5 × Temperature sensor IC LM35DZ
5 × Temperature sensor IC DS18B20 Redundant temperature sensor
2 × Submersible water pump DC 3-6V 120L/H Low Noise Lift 1.1m
2 × Water pump DC 3-12V RS-360SH
2 × Water level sensor module Measuring water level in reservoirs
3 × Silicone tubing [meters] - For the water pump Food Grade - Outer Diameter*Inner Diameter: 6*4mm
2 × Silicone tubing [meters] - For the submersible water pump Food Grade - Outer Diameter*Inner Diameter: 3*5mm -
360 × Full range pH paper strips pH measuring
4 × Soil humidity sensor
2 × Humidity sensor DHT11
15 × Assorted jumper wire connectors 70cm assorted 2pin 3pin 4pin Female-Female
1 × IR LED board for NoIR camera
1 × Arduino Sensor Shield
10 × 30cm jumper wire Dupont cable For sensor shield
1 × USB 2.0 male to Micro USB Power the Raspberry Pi - 6ft=2m
2 × Ultrasonic Distance Sensor HC-SR04 Measure the plant height
5 × Motion Sensor Detector Pyroelectric InfraRed (PIR)
1 × 4-Channel Relay Module For the water pumps and lights
1 × Dual USB wall charger (2.1A + 1A) 2.1A for Raspberry-Pi <> 1A for Arduino
5 × LED strip [meters] 5050 SMD LED, 60 LEDs/m, flexible, waterproof
2 × Ultrasonic Sensor Mounting Bracket